Polaris 2013 BRUTUS Owner's Manual - Manual (Page 90)

89
MAINTENANCE
Gearcases
Gearcase Specification Chart
Transmission (Main
Gearcase)
Always check and change the
transmission oil at the inter-
vals outlined in the Periodic
Maintenance Chart begin-
ning on page 78. Maintain
the oil level even with the
bottom of the fill plug hole
threads.
Refer to the Gearcase Speci-
fications Chart for recom-
mended lubricants, capacities and torque specifications. See
page 128 for the part numbers of POLARIS products.
Oil Check
The fill plug is located on the right side of the transmission.
Access the fill plug from the rear right-hand side of the vehi-
cle.
1. Position the vehicle on a level surface. Remove the fill
plug.
2. Check the oil level. Add the recommended oil as needed.
3. Reinstall the fill plug. Torque to specification.
Oil Change
The drain plug is located on the bottom of the transmission.
Access the drain plug from under the rear of the vehicle.
1. Remove the fill plug.
2. Place a drain pan under the
vehicle at the location of the
drain plug.
3. Remove the drain plug.
Allow the oil to drain
completely.
4. Clean and reinstall the drain
plug with a new sealing
washer. Torque to specifica-
tion.
5. Add the recommended oil.
6. Reinstall the fill plug. Torque to specification.
7. Check for leaks. Dispose of used oil properly.
BRUTUS Gearcase Specifications
Gearcase Lubricant Capacity Fill Plug
Torque
Drain Plug
Torque
Main Gearcase
(Transmission)
AGL PLUS
Transmission
Fluid
41 oz.
(1200 ml)
12 ft. lbs.
(16.3 Nm)
12 ft. lbs.
(16.3 Nm)
Front
Gearcase
Demand Drive
PLUS Fluid
6.75 oz.
(200 ml)
8-10 ft. lbs.
(11-13.6 Nm
8-10 ft. lbs.
(11-13.6 Nm)
Fill Plug Fill Level
Drain Plug