Polaris Series 11 Polaris Ranger 4x4 - Manual (Page 34)

32
FEATURES AND CONTROLS
Switches
Ignition Switch
The ignition switch is a three-position, key-operated switch. The key
can be removed from the switch when it is in the OFF position.
Light Switch
Turn the headlights and taillights on by flipping the light switch up (the
ignition switch key must be in the ON position). Flip the switch down
to turn the lights off.
AWD Switch
Vehicles equipped with AWD can be operated in either 2WD or AWD.
Flip the AWD switch up to engage the AWD. Flip the switch down to
return to 2WD.
Under some conditions, it’s possible for the AWD to remain engaged.
See page 51 for manual disengagement instructions.
OFF
ON
START
Engine off. All electrical circuits are off except Acc. 12V.
Electrical circuits are on. Electrical equipment can be used.
Electric starter is engaged by holding ignition switch key
in this position. Upon release, the key will return to the ON
position.
Leaving the keys in the ignition can lead to unauthorized use of
the vehicle resulting in serious injury or death. Always remove
the ignition key when the vehicle is not in use.
WARNING