beautypg.com

Warning, Features and controls, Seat removal – Polaris Series 11 Polaris Ranger 4x4 User Manual

Page 31: Seat belts

background image

29

FEATURES AND CONTROLS

Seat Removal

Pull up on the front of the seat

and slide it toward the front of

the vehicle.
Install the seat by sliding the

tabs into the rear of the seat

base. Push down firmly on the

front of the seat until the pins

are fully seated into the

grommets.

Seat Belts

The RANGER is equipped with

lap-style seat belts for the operator and passenger.

To wear the seat belt properly, follow this procedure:
1. Place the belt across your lap as low on your hips as possible,

taking care that the belt is not twisted.

2. Push the latch plate into the buckle until it clicks.

3. Release the strap, it will self tighten. NOTE: The center belt must

be tightened manually by pulling on the strap.

To unfasten, press the square red button in the buckle’s center.

WARNING

Falling from a moving vehicle could result in serious injury or death.

Always fasten your seat belt securely before operating or riding in

the RANGER.
Passengers under five years of age require special restraints,

which are not available with this vehicle. No person under the age

of five years may ride in the RANGER.