Polaris Series 11 Polaris Ranger 4x4 - Manual (Page 56)

54
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
Careful periodic maintenance will help keep your vehicle in the safest,
most reliable condition. Inspection, adjustment and lubrication
intervals of important components are explained in the following
schedule.
Maintenance intervals are based upon average operating conditions.
Vehicles subjected to severe use, such as operation in wet or dusty
areas, should be inspected and serviced more frequently. If you’re not
familiar with safe service and adjustment procedures, have a qualified
dealer perform these operations.
NOTE: Hours are based on 10 mph average. If service is due at 20
hours, the equivalent odometer reading would be 200 miles. Perform
all services at whichever reading is reached first.
Inspect, clean, lubricate, adjust or replace parts as necessary. When
inspection reveals the need for replacement parts, always use genuine
Polaris parts available from your Polaris dealer.
Maintenance Chart Key
"
Perform these operations more often under severe use, such as in
dirty or wet conditions, to purge water or dirt contamination from
grease fittings and other critical components.
L
Emission Control System Service (California - 4-Cycle)
NOTE: Some 4-Cycle models may have an additional California
-only emissions warranty. Please refer to your owner’s manual
supplement for model specific information.
J
Dealer service item.