Polaris 2000 Universal Snowmobile User Manual
Page 88
83
MAINTENANCE
Torque Stop
If your machine is equipped with a torque stop, periodically check torque stop
clearance. Before this procedure it will be necessary to ensure the clutches are
properly aligned. The torque stop clearance should be a minimum of .010″ to a
maximum of .030″ from the engine case. Adjust if necessary and lock jam nut.
Reverse Kit Maintenance
If your machine is equipped with reverse or if you have a reverse kit installed, it is
especially important to maintain track tension as specified on page 89.
WARNING
If specified track tension is not maintained severe damage to the machine may oc-
cur, which can result in loss of vehicle control. Loss of control can result in severe
personal injury or death.
D
Never attempt to shift into reverse while machine is moving.
D
Allow engine to reach idle speed before attempting to shift into or out of reverse.
CAUTION:
If machine has not come to a complete stop before shifting, damage will occur to
chaincase or transmission.
If you have had a reverse kit installed on your snowmobile, some maintenance will
be required. Follow these recommendations:
Chain Tension
Maintain the proper chain tension. See page 67.
Oil Level
Maintain the oil level between the safe marks on the dipstick.
Oil Change
Change the oil annually.