Polaris 2000 Universal Snowmobile - Manual (Page 82)

77
MAINTENANCE
NOTE: Do not touch a halogen bulb with bare fingers. Oil from skin leaves a resi-
due, causing a hot spot which will shorten the life of the lamp.
Removing the Side Bulbs
1. Disconnect terminal from back of bulb.
2. Turn bulb assembly 1/4 turn to right and withdraw from housing.
Installing the Side Bulbs
1. Hold bulb assembly by plastic base and plug into wire terminal.
2. Insert bulb assembly into housing.
3. Turn bulb assembly 1/4 turn to left to secure in housing.
4. Verify headlight operation.
Wrap Around Taillight Bulb Replacement
1. Remove Phillips screws from
taillight lens (A).
2. Working from front to back,
carefully pry lens away from seal
and remove lens.
3. Pull bulb(s) (B) straight out from
socket and insert new bulb.
4. Reinstall lens.
B
A