Polaris 2003 Victory Classic Cruiser - Manual (Page 78)

76
PRE-OPERATION CHECK
Check Sidestand
Straddle the motorcycle and bring it to a vertical position. Move the sidestand to
its stored (up) position, then to its fully extended (down) position and back
again. It should move smoothly and quietly. When the sidestand is in its stored
position, the sidestand return spring should hold the sidestand tightly against the
motorcycle.
Check the condition of the sidestand rubber pad, and make sure it’s firmly
attached to the sidestand.
Check Fasteners
Visually inspect the entire motorcycle chassis and engine for loose, damaged or
missing fasteners. Tighten loose fasteners to the proper torque (see the
specifications section of this manual or see the Victory Service Manual).
Immediately replace stripped, damaged or broken fasteners with genuine Victory
fasteners of equal size and strength immediately.
1. Sidestand
2. Rubber Pad
1
2