Polaris 2003 Victory Classic Cruiser - Manual (Page 144)

142
MAINTENANCE
Auxiliary Lights Adjustment (Touring Models)
Each lamp should shine straight ahead or slightly to
the right of the motorcycle. The top of each lamp
beam should be just below the center of the lamp at a
distance of 25 feet (7.62 m).
1. Check and adjust the tire pressure and rear shock
absorber (see page 107).
2. Straddle the motorcycle in an upright position
and sit in the operator’s seat.
3. Set the ignition switch to the ON position and
turn the auxiliary lights on. Check the auxiliary
lights for correct aim.
4. To adjust the lights, remove the front running light/turn signal
bracket to expose the auxiliary light nut. Loosen the nut and
adjust the auxiliary light.
5. Tighten the auxiliary light nut and recheck the light for correct
aim.
6. Reinstall the front running light/turn signal bracket.
25 feet (7.62 m)
Center of Driving Light
1. Running Light/Turn Signal Bracket
1