Polaris 2003 Victory Classic Cruiser - Manual (Page 53)

51
INSTRUMENTS, FEATURES AND CONTROLS
Multi-Function Display (MFD)
Use the MFD to view the odometer, trip odometer, clock, fuel gauge, voltmeter, instrument cluster light dimmer,
headlamp high beam indicator light dimmer and check engine indicator. The MFD operates only when the ignition
switch is in the ON position. To select the desired function, press the MODE button (page 59). To adjust a particular
function, press the SET button (page 57).
Odometer
The odometer is the default mode of the MFD after starting the engine. The odometer shows total miles traveled.
To toggle the odometer and trip odometer reading between miles and kilometers, and the fuel gauge reading
between gallons and liters, the ignition switch must be in the ON position with the MFD in odometer mode. Press
and hold the SET button for three seconds.
To change to the next MFD function, press the MODE button.
Trip Odometer
“TRIP” appears in the display when in trip odometer mode. The trip odometer shows total miles traveled since the
trip odometer was reset. You can use the trip odometer to calculate your miles per gallon and estimate the number of
miles you can travel on a tank of fuel.
To reset the trip odometer, the ignition switch must be in the ON position with the MFD in trip odometer mode.
Press and hold the SET button for three seconds.
To change to the next MFD function, press the MODE button.