Polaris 2003 Victory Classic Cruiser - Manual (Page 68)

66
PRE-OPERATION CHECK
Check Electrical Equipment
Turn Signals/Running Lights
The two amber front running lights should illuminate (US and Canadian models only). Move the turn signal switch
to the left. The front and rear left turn signals and the left turn signal indicator in the instrument cluster should flash.
Push the switch in toward the housing. The turn signals and turn signal indicator should stop flashing. Repeat the
procedure for the right turn signals.
Emergency Flashers
Slide the emergency flasher switch to the left. All four turn signals and both turn signal indicators in the instrument
cluster should flash. Slide the switch to the right. The turn signals and turn signal indicators should stop flashing.
Horn
Press the horn button. The horn should sound loudly.
Engine Stop/Run Switch
Be sure the engine stop/run switch stops the engine, or prevents the engine from starting when set to the STOP
position.
Notice If you regularly use this switch to shut off the engine, you’re already checking its operation each time
you use the motorcycle.