Polaris 2003 Victory Classic Cruiser - Manual (Page 128)

126
MAINTENANCE
Brakes
Check Brake Pads
Look into the front brake caliper(s) from underneath, and into the
rear brake caliper from behind, you should see at least 1/16 inch (1.6
mm) of friction material on each of the brake pads. If in doubt,
measure remaining friction material. Replace brake pads having less
than the specified amount of friction material at their thinnest point.
If the brake pads require replacement, see the Victory Service
Manual or an authorized Victory dealer for assistance.
Check Brake Hoses and Connections
Inspect all brake hoses and connections for dampness or stains from
leaking or dried fluid. Tighten any leaking connections and replace
components as necessary. 1. Front Brake Pad
Friction Material
2. Rear Brake Pad
Friction Material
1
2