Polaris 2003 Victory Classic Cruiser - Manual (Page 60)

58
INSTRUMENTS, FEATURES AND CONTROLS
Right Handlebar Controls
Engine Stop/Run Switch
The engine stop/run switch completes or interrupts the ignition,
starter, and fuel pump circuits. To complete the circuits, allowing
the engine to start and run, press the lower portion of the engine
stop/run switch (RUN position). To interrupt the circuits, press the
upper portion of the switch (STOP position). The engine should
not start or run when the switch is in the STOP position.
Use the engine stop/run switch to turn the engine off under either
normal or emergency conditions.00000000
Emergency Flasher Switch
The emergency flasher switch activates and cancels the emergency
flashers. When the emergency flashers are active, all of the turn
signals flash. To activate the emergency flashers, slide the switch
to the left (to the triangle). To cancel the flashers, slide the switch
to the right (to the dot).
Starter Button
The starter button works only when the engine stop/run switch is
in the RUN position and the transmission is in neutral or the
clutch is disengaged. To engage the engine starter motor, press the
right side of the starter button.
For complete engine starting procedures, see “Starting the Engine” on page 82.
5
1
2
3
4
1. Engine Stop/Run Switch
2. Emergency Flasher Switch
3. Starter Button
4. Throttle Control Grip
5. Multi-Function Display MODE Button