Polaris 2003 Victory Classic Cruiser - Manual (Page 139)

137
MAINTENANCE
Battery
Battery Removal
1. Remove the left side cover and remove the battery hold-down strap.
2. Disconnect the negative ( - ) battery cables (cable ends are exposed).
3. Disconnect the positive ( + ) cables (cable ends are covered with a red boot).
Disconnecting the positive cable first can produce an electric shock that could result in damage or injury.
Caution
4. Slide the battery out.
Notice The multi-function display (MFD) clock will not function if the battery voltage drops below 11.5
volts. The clock will reset to 12:00 if the battery is disconnected.