Polaris 2003 Victory Classic Cruiser - Manual (Page 49)

47
INSTRUMENTS, FEATURES AND CONTROLS
Ignition Switch/Seat Release
Park Position (P)
In the PARK position, the taillight and running lights illuminate, the emergency flashers can be activated, and the
ignition key can be removed. You must push the ignition key into the switch while selecting the Park position.
Seat Release Position (Classic Cruiser)
To release the operator’s seat on the Classic Cruiser, insert the ignition key into the ignition switch/seat release and
turn the key counterclockwise.
Helmet Holders (Classic Cruiser)
The helmet holders are a secure place to store your helmet while the motorcycle is parked. The Classic Cruiser has
two helmet holders (one on each side). They’re located under the operator’s seat.
Do not ride the motorcycle with a helmet in the helmet holder. The helmet can interfere with your
ability to safely operate the motorcycle, causing loss of control.
WARNING
To store your helmet, remove the operator’s seat and slide the helmet D-ring into the helmet holder. Reinstall the
operator’s seat.