Polaris 2003 Victory Classic Cruiser - Manual (Page 104)

102
MAINTENANCE
Drive Belt
Check Drive Belt Condition
Replace the drive belt if it is cracked or has broken teeth or frayed
edges. No matter its condition, the drive belt should be replaced at
periodic intervals (see the Victory Service Manual or an authorized
Victory dealer).
Check Drive Belt Tension
This procedure involves using the belt tension gauge, part no.
PV-43532, which is designed specifically for measuring drive belt
tension.
Before beginning this procedure:
S
Make sure the drive belt is dry and at room temperature.
S
Make sure the rear suspension is properly adjusted (see “Adjust
Rear Shock Absorber” page 107).
1. Place the transmission in Neutral and lift the rear wheel off the
ground with an appropriate motorcycle lift or a block of wood or
steel placed securely under the frame.
1. Belt Tension Gauge
2. Small O-Ring
3. Base
4. Plunger
1
2
3
4