Polaris 2003 Victory Classic Cruiser - Manual (Page 146)

144
MAINTENANCE
Saddlebag Removal and Installation
Hard Saddlebags
1. Remove the two (2) upper saddlebag mounting screws located inside
the saddlebag.
2. Pull trim straight outward to expose wiring harness connector.
3. Disconnect the wiring harness connector.
4. Disengage bracket on bottom of bag from muffler bracket and remove
bag.
5. To reinstall the saddlebag, engage bottom of bag into bracket on
muffler. Reconnect the wire harness and trim, and install all spacers
and fasteners in their original location.
Torque: 18 ft-lbs (25 Nm) 1. Upper Mounting Bolts
1
2. Remove Trim 3. Disconnect Wire Harness