Grass Valley Zodiak Installation Planning Guide - Manual (Page 8)

8 Zodiak Installation Planning Guide
Installation
Removable Media Drives
Four removable media drives are standard components of a Zodiak
system:
• A CD-ROM in the Menu panel (see Figure 8 ),
• An external 250 MB Zip drive connected through and powered by the
USB port on the Menu panel (see
Figure 9 ), and
• Two standard 1.4 MB 3.5 in. floppy disk drives, one in the Main Panel
tub (see
Figure 2 ) and one in the Video Processor frame (see Figure 18 ).
Note The floppy disk drives are used exclusively for emergency boot procedures.
Installation
Main Panel
Main panel installation requires careful attention to the console support
structure and the console cutout dimensions necessary to accommodate the
mounting flanges located on the front and sides of the tub (
Figure 2 ).
Figure 2. Floppy Drive and Mounting Flanges
CAUTION The Main panel weighs approximately 36 kg (79 lb). Prior to installation,
ensure that your console is structurally capable of supporting the Main panel.
The Main panel was designed to be flush mounted in a console, but it may
also be surface mounted.
Figure 3 provides installation details for both
flush mount and surface mount installations. Figure 4 through Figure 6
provide panel dimensions and connector layout.
8096_01_01_r0
Floppy
Disk Drive
0.43 in.
11 mm