Grass Valley Zodiak Installation Planning Guide - Manual (Page 32)

32 Zodiak Installation Planning Guide
Zodiak System Control Cabling
Zodiak System Control Cabling
A simple Zodiak system consisting of a Main panel, Menu panel, and Video
Processor frame uses point-to-point connections and does not require an
external Ethernet Local Area Network (LAN) (see
Figure 39 ).
The Zodiak system uses Ethernet, serial, parallel, and USB connections.
Tally and GPI control are available (see
Figure 38 ).
Refer to Table 7 for a list of supplied cables.
Figure 38. Simple Zodiak System Control
Table 7. Supplied Cables (No Options)
Cable Description Quantity
AC Power Supply Cable — Main Panel AC line cord kit 2
AC Power Supply Cable — 3-M/E Frame AC line cord kit 3 a
a Two supplied cables for a 2.5-M/E frame.
Main Panel to Menu Panel DC Power 8-pin DIN, male-to-male, 10 ft (3 m) 1
Menu Panel to ZIP 250 USB USB AB cable, 6 ft (1.83 m) 1
Menu Panel to Main Panel 9-pin D, male-to-female serial, 10 ft (3 m) 1
Panel LAN, Menu LAN Category 5, 100 Base-T, 100 ft (30 m) 2
Menu LAN
USB
Optional Keyboard
Optional Mouse
Menu Panel
Zip Drive
Optional
Future Satellite
Panels (1-2)
NOTE: Main Panel, Menu LAN, Panel LAN 10Base-T or 100Base-T Ethernnet
Main Panel
Point to Point Serial
RS-422/Serial Async
8096_00_19_r3
Main Control Surface
Floppy
Drive Control Panel Processor
System Processor
Button Knob Control (Serial)
Touch Screen Control (Serial)
8 GPI In
8 GPI Out
4 Serial
Tally (Relay)
2 CPL
Video Processor Frame
Control System
Hard
Drive
Floppy
Drive
CD-ROM
Panel LAN
Control Line
Control Surface Boundary
Serial
4 GPI In
4 GPI Out