Grass Valley Zodiak Installation Planning Guide - Manual (Page 19)

Zodiak Installation Planning Guide 19
Installation
The Zodiak Video Processor frame houses components as shown in
Figure 18 . Table 3 lists the standard modules and options for 2.5-M/E and
3-M/E Zodiak configurations . The frame is shown below with the front
door removed. The front door must remain in place and closed during
normal system operation to maintain maximum cooling efficiency.
Figure 18. Video Processor Frame, Front View
Table 3. Standard Modules and Options for 2.5-M/E and 3-M/E Configurations
Standard Modules 2.5-M/E System 3-M/E System
Control Processor/DSK/Still Store Yes Yes
Mix Effects (M/E 1 and M/E 2) Yes Yes
Mix Effects (M/E 3) N/A Yes
Input/Crosspoint/Sync Generator Yes Yes
Fan Module Yes Yes
Air Filter Yes Yes
Power Supply Modules 2 3
Module Options 2.5-M/E System 3-M/E System
Single Spare Power Supply Module Yes Yes
2.5-M/E to 3-M/E Upgrade Kit Yes N/A
8096_00_16_r2
ON OFF Control Processor/DSK/Still Store
(Slot 1)
M/E (M/E 1 & 2)
(Slot 2)
Fan Module
Floppy Drive
M/E (M/E 3)
(Slot 3)
Input/Crosspoint/Sync Generator
(Slot 4)
Power Supply Slots (3)
Air Filter
Air Filter Handle
Fan (4)
on Module
P/S Slot 2 P/S Slot 1 P/S Slot 3 P/S Latch
Single Board
Computer
Mezzanine
Power Switch