Grass Valley Zodiak Installation Planning Guide - Manual (Page 40)

40 Zodiak Installation Planning Guide
Specifications
Specifications
Table 15. Zodiak System Specifications
Power
Video Processor Frame
Power Supply
100-125 VAC or 200-250 VAC autorange, 50-60 Hz
power factor corrected
Power Consumption
2.5-M/E: 300 W (typical)
3-M/E: 400 W (typical)
Main Panel
Power Supply
100-125 VAC or 200-250 VAC autorange, 50-60 Hz
power factor corrected
Power Consumption 150 W (typical)
Environmental
Temperature Range
Frame, Menu Panel
Specification: 20º to 30º C (68º to 86º F)
Operational: 0º to 40º C (32º to 104º F)
Main Panel
Specification: 20º to 30º C (68º to 86º F)
Operational: 0º to 35º C (32º to 95º F)
Relative Humidity Up to 95% (non-condensing)
Mechanical Stress ASTM D 4728, Fig. X1.1, Table X1.1, Truck Profile
Serial Digital Video Inputs
Number 64 non-looping
Type of Connectors 75 ohm BNC, (SMPTE 259M)
Nominal Amplitude 800 mV peak-to-peak terminated
Return Loss > 15 dB, 5 MHz to 270 MHz
Channel Coding Conforms to SMPTE RP-259M
Ancillary Data Included on each M/E and DSK Program output
Input Impedance 75 ohm, self terminating
Autotiming Range (Serial Inputs) ± 14 microseconds a
Maximum Cable Length Equalized
(Belden 8281 type cable) 738 ft (225 m)
Number of Bits 10
Serial Digital Video Outputs
Number 26 outputs (3-M/E), 2 BNCs per output (52 BNCs)
Type of Connectors 75 ohm BNC, self terminating (SMPTE 259M)
Amplitude 800 mV peak-to-peak across 75 ohm ± 10% (SMPTE 259M)
Return Loss > 15 dB, 5 MHz to 270 MHz
Rise and Fall Times (between 20%
and 80% amplitude points) Between 400 picosecond and 1.5 nanosecond across 75 ohm termination
Timing Jitter 0.2 UI (SMPTE RP184-1996 method)
Channel Coding Conforms to SMPTE RP-259M
Output Impedance 75 ohm
Ancillary Data Passed from A background to program outputs
DC Offset on Output < 50 mV across 75 ohm termination
Number of Bits 10
Number of Outputs 2 BNC connectors per channel