Grass Valley XSwitch Feb 01 2005 - Manual (Page 22)

20 ©2001 XSWITCH Installation and Operations Manual
6RIWZDUH 6HWXS DQG 2SHUDWLRQ
To switch to another rack, Use the Function Up and Function Down buttons.
XSWITCH MENU
The XSWITCH Menu is accessed by pressing the SEL button while the Main Screen is visible.
To select a menu item, press select while the desired menu item is highlighted on the XSWITCH Menu.
To choose a menu item, use the Function Up and Function Down Buttons.
Card Setup
The Card Setup Screen is displayed when selected from the XSWITCH Menu. This screen is used to con-
figure Switch Card operation.
When the screen is first displayed, the Rack number will be flashing. Rack 0 corresponds to the Master
Module. The Data Up and Data Down buttons are used to select the desired module (Rack number).
Press SEL To configure the indicated card rack.
A flashing cursor initially appears over Card 1, configuration mode A. Press 'SEL' to toggle the state of
that card when that mode is selected. If a letter appears hollow, that card will be OFF when that mode is
selected. (i.e. if 1-A is hollow, card 1 will be OFF when mode 'A' is selected). If a letter appears filled, that
card will be ON when that mode is selected (i.e. if 1-B is filled, card 1 will be ON when mode 'B' is
selected).