Safety summaries, General safety summary, Injury precautions – Grass Valley PFR600/E User Manual
Page 5: Use correct power cord, Ground the product, Do not operate without covers, Do not operate in wet/damp conditions, Do not operate in an explosive atmosphere, Avoid exposed circuitry, Product damage precautions
20 February 2004
PFR600/E Instruction Manual
5
Safety Summaries
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage
to this product or any products connected to it.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of the system.
Read the General Safety summary in other system manuals for warnings and
cautions related to operating the system.
Injury Precautions
Use Correct Power
Cord
Power cords for this equipment, if provided, meet all North American
electrical codes. Operation of this equipment at voltages exceeding 130
VAC requires power supply cords which comply with NEMA
configurations. International power cords, if provided, have the approval
of the country of use.
Ground the Product
This product is grounded through the grounding conductor of the power
cord. To avoid electric shock, the grounding conductor must be connected
to earth ground. Before making connections to the input or output terminals
of the product, ensure that the product is properly grounded.
Do Not Operate
Without Covers
To avoid electric shock or fire hazard, do not operate this product with
covers or panels removed.
Do Not operate in
Wet/Damp
Conditions
To avoid electric shock, do not operate this product in wet or damp
conditions.
Do Not Operate in an
Explosive
Atmosphere
To avoid injury or fire hazard, do not operate this product in an explosive
atmosphere.
Avoid Exposed
Circuitry
To avoid injury, remove jewelry such as rings, watches, and other metallic
objects. Do not touch exposed connections and components when power is
present.
Product Damage Precautions
Use Proper Power
Source
Do not operate this product from a power source that applies more than the
voltage specified.
Provide Proper
Ventilation
To prevent product overheating, provide proper ventilation.
Do Not Operate With
Suspected Failures
If you suspect there is damage to this product, have it inspected by qualified
service personnel.