Grass Valley PDR 100 Master Enhanced Disk Recorder Board - Manual (Page 25)

Reinstalling Board Retainer Brackets
PDR 100 Master Enhanced Disk Recorder 15
To reinstall the full size board retainer bracket:
1. Place bracket (
Ì
in Figure 10) over the boards.
2. Align the full size boards to the correct bracket slots (see insert in Figure 10)
and carefully seat the bracket onto the boards.
3. Use the Torx tool with the T10 bit to replace bracket retaining
screw (
Í
in Figure 10) at the side of the PDR100.