Grass Valley PDR 100 Master Enhanced Disk Recorder Board - Manual (Page 19)

Installing the Master EDR Board
PDR 100 Master Enhanced Disk Recorder 9
Installing the Master EDR Board
These instructions describe installation of the Master EDR board into the old
Master Disk Recorder board slot.
To install the Master EDR board:
1. Align the Master EDR board with the connectors on the motherboard slot (as
shown in Figure 5), making sure the extractor on the front end of the board
is in the up position. Firmly press down on the board until the board seats.
The board is properly seated when the top of the rear mounting bracket is
resting on the rear chassis wall shelf.
Figure 5. Installing the Master EDR board
0463-2