Grass Valley Kayak HD Installation v.6.9.4 Jun 02 2011 - Manual (Page 175)

Kayak HD — Installation and Service Manual 175
Additional Kayak Panel FRUs
9. Replace all screws, including the hex stand-off.
10. Reconnect the fan housing connectors.
11. Reconnect all cables, using the preceding instructions and/or refer to
the following table
12. Transfer the existing CF Card from the old Panel CPU board to the new
one. For information about replacing the CF Card, see
Replacing CF
Cards (2-M/E and 3-M/E) (128MB/512MB) on page 185 .
Table 12. Kayak Panel CPU Board—Connections Reference
From To
RY4511/J21/50 Pin RY4551/J1/50 Pin
RY4511/J17/50 Pin RY4030/J1/50 Pin
RY4511/J15/50 Pin RY4020/J1/50 Pin
RY4511/J14/50 Pin RY4540/J1/50 Pin
RY4511/J6/40 Pin RY3820/TFT Display
RY4511/J7/20 Pin RY3820/J3/20 Pin