Output settings panel – Grass Valley Kaleido-MX 4K (1RU) v.7.80 User Manual
Page 40

26
Operation
Output Settings Panel
Service control panel for a Kaleido-MX 4K output card
The status icon area contains only one icon: the control status icon.
• A green control status icon
indicates that the card is available for remote control
from the service control panel in iControl.
• A yellow icon
indicates that someone is controlling the card from the control panel
on the housing frame (see
Using the Densité Frame Control Panel
The navigation area contains buttons that control the contents of the main area.
• Click a button to access the associated features.
• Click the left side border (identified by a small arrow icon) to hide or reveal this area.
The operating control area contains the main operating controls for managing the
Kaleido-MX 4K multiviewer’s feature set. The contents change depending on the button
you clicked in the navigation area. The three panels are described individually in the
following sections:
•
•
•
Output Settings Panel
Set the resolution of the multiviewer output heads to 1080p50, or 1080p59.94, depending
on your display’s refresh rate. Each head corresponds to one quadrant of the quad link
(square division) 4K UHD signal that feeds the display. The output cards must not be
Click to hide
or show the
navigation
area
Navigation area
Status icon
area
Operating
control
area