Mechanical installation, Unpacking – Grass Valley Kaleido-MX 4K (1RU) v.7.80 User Manual
Page 19
5
Kaleido-MX 4K (1RU)
Hardware Description & Installation Manual
Mechanical Installation
Unpacking
Make sure the following items have been shipped with your Kaleido-MX 4K 16 × 1 system. If
any of these are missing, contact your distributor or Grass Valley (see
page 37).
• Kaleido-MX 4K (1RU) unit with pre-installed cards (1 input card, 2 output cards, a
Densité CPU-ETH2 controller card, and a GPI-1501 GPI I/O module), and 1 or 2 power
supplies (second power supply optional)
• Two AC power cords
• Two cable retainers
• One quad link SDI to HDMI 2.0 converter
• One WECO mating connector for the CPU-ETH2 controller card’s GPI output.
• Two serial port adapters (one with straight cabling and one with crossover cabling
—
see
• The Kaleido-MX 4K (1RU) Quick Start Guide
• DVD including the Release Notes for the current version of the Kaleido-X software, the
Kaleido-X User’s Manual, database samples, Quick Start guides and hardware reference
manuals for all multiviewer models
• Due to space constraints at the 1RU rear panel, the Kaleido-MX 4K 16 × 1
model does not support analog audio outputs. Audio monitoring is
available at the SDI outputs only.
Notes (continued)
Part number
Adapter cabling
RS-422 pinout at the DE-9P connector
1737-3000-102
Straight
Controller (SMPTE master) mode
1792-3700-100
Crossover
Tributary (SMPTE slave) mode
Note:
In line with our commitment to environmental preservation, only the
Quick Start Guide for your multiviewer model, and some ancillary
documents (e.g. welcome letters, warranty cards) are distributed in printed
form. All manuals and the Release Notes are available on the DVD that
shipped with your multiviewer. See the Documentation section of the
Release Notes for a complete list. You can obtain the latest version of the
manuals, the Release Notes, as well as software and useful data, from the
Documentation Library section of Grass Valley’s website.