Grass Valley K2 Dyno Replay Controller - Manual (Page 21)

June 16, 2009 K2 Dyno Replay Controller Service Manual 21
Finding Information
This service manual provides procedures for servicing the K2™ Dyno™ Replay
Controller to the field-replaceable unit level. Use this manual to isolate problems to a
board or module, such as the Power Supply, and to make repairs through module
exchange.
How this manual is organized
This manual is organized around the tasks required to service the Dyno controller. The
following describes the chapters included in this manual:
Chapter 1, Product Description — Describes the key features, system components,
and status indicators of the Dyno controller.
Chapter 2, Service Procedures — Contains procedures for periodic maintenance and
repair.
Chapter 3, Troubleshooting problems — Contains problem descriptions with steps for
diagnosing and correcting the cause of the problem. Use this information if you are
having trouble with your Dyno controller.
Chapter 4, Removing and replacing FRUs — Contains procedures for removing and
replacing field replaceable hardware components.
Getting more information
The following sections help you find the information you need in product manuals
and elsewhere.
K2 documentation
Read the following descriptions to locate the information you need.
K2 Dyno Replay System Quick Start Guide — You receive this guide in the product
packaging with your K2 Dyno Replay Controller. The Quick Start Guide provides
step-by-step installation instructions for basic installation and operation of the replay
system, which includes the K2 Dyno Replay Controller and the K2 Summit
Production Client.
Release Notes — The release notes contain the latest information about the software
shipped on your system. There are K2 Release Notes and K2 Dyno Replay Controller
Release Notes. The information in release notes includes software upgrade
instructions, software specifications and requirements, feature changes from the
previous releases, and any known problems. Because release notes contain the latest
information, they are printed out rather than included in the Documentation
CD-ROM.
K2 Documentation CD — Except for the release notes, the full set of support
documentation, including this manual, is available on the Documentation CD-ROM
that you received with your Dyno controller. The K2 Documentation CD includes the
following documents:
• K2 Dyno Replay System Quick Start Guide — As described above.
• K2 Dyno Replay Controller User Manual — Describes Dyno controller applications
and provides instructions for configuring and operating the product.