Grass Valley K2 Dyno PA Configuration Manual v.2.0 - Manual (Page 36)

Managing K2 Dyno PA on page 31
Editing a server
1. To modify a K2 system in the K2 Dyno PA application, right-click on the K2 system and select
Edit Server .
2. Make any desired changes, and click OK .
NOTE: Any changes made to a server do not take effect until the Dyno PA application is
re-started.
Related Links
Managing K2 Dyno PA on page 31
Deleting a server
1. To delete a K2 system as a K2 Dyno PA server, right-click on the system in the Navigation pane
and select Edit Server .
The Add/Edit Servers Device dialog box displays.
2. Check the Delete Next Startup box and click OK .
The K2 system is not deleted until the next time the Dyno PA application is started.
Related Links
Managing K2 Dyno PA on page 31
Adding or replacing a standalone K2 Summit system in an existing K2
Dyno PA system
If using the Browse feature in Dyno PA, and a standalone K2 Summit system needs to be added or
replaced, follow these steps.
36 K2 Dyno Production Assistant Configuration Manual version 2.0 22 June 2011
Managing K2 Dyno PA