Grass Valley K2 Dyno PA Configuration Manual v.2.0 - Manual (Page 17)

To install the Dyno PA application, follow these steps:
1. Double-click the Dyno_PA_Installer.exe file.
2. Follow the installation wizard, and accept the End User License Agreement (EULA).
3. When prompted, select the Dyno PA application. By default, the installation wizard installs both
the platform service and the Dyno PA application at the same time.
The Dyno PA application is now installed.
4. Once you have installed the platform service and K2 Dyno PA application, you need to start the
Dyno PA application to configure it. Proceed to Starting the K2 Dyno PA application.
Related Links
About the K2 Dyno PA application and the Dyno Production Assistant platform service on page 15
About the K2 Dyno PA application and the Dyno Production Assistant platform service on page 15
Installing the Dyno Production Assistant platform service on page 16
Starting the K2 Dyno PA application on page 17
Starting the K2 Dyno PA application
The K2 Dyno PA application can be started from the desktop icon or from selecting Start | Programs
| Grass Valley| Dyno PA Client . Multiple Dyno PA clients can access one Dyno Production Assistant
platform service.
Prerequisites:
• The Dyno Production Assistant platform service starts automatically. The platform service must
be running before you start the K2 Dyno PA application.
When the Dyno PA application is first started, it runs on a 30-day trial license. To continue using
Dyno PA, you need a permanent license to run Dyno PA. For more information on licensing, see
the K2 Dyno PA Release Notes.
To start the K2 Dyno PA application, follow these steps:
1. Double-click on the Dyno PA icon.
The Dyno PA login displays. This allows you to log in to the PC that runs the Dyno Production
Assistant platform service.
2. Enter the following:
a) A username and password. If logging in as an administrator, supply the administrator username
and password as specified in the Managing Users chapter of the Configuration manual. If
logging in as a normal user, enter the username and password supplied by your administrator.
b) The name or IP address of the PC running the Dyno Production Assistant platform service.
If the platform service is running on the same machine, enter localhost .
3. Click the Connect button.
Dyno PA connects with the platform service. The License Selection dialog box displays. If you
have already purchased a permanent license, that license is displayed. For information on licensing,
see the K2 Dyno PA Release Notes.
4. Highlight the license you want to use. To make this the default license, check the Make Default
box. Select the license from the drop-down list.
22 June 2011 K2 Dyno Production Assistant Configuration Manual version 2.0 17
Configuring the standalone K2 Summit system and K2 Dyno PA