Grass Valley K2 Dyno PA Configuration Manual v.2.0 - Manual (Page 13)

Related Links
Configuring the standalone K2 Summit system and K2 Dyno PA on page 9
Ordering the network adapters for K2 Dyno PA
Prerequisites:
• The K2 software must be installed and configured as specified in the K2 Summit documentation.
• The file system name and storage disk labels on the K2 Summit system need to be unique. If the
system has been upgraded from an earlier version than 7.2, the file system must be re-created
with the Storage Utility tool, as specified in the K2 System Guide.
To enable the Browse feature on K2 Dyno PA, SNFS requires that the first network adapter on the
K2 Summit system must be the Control connection; the loopback adapter cannot be the first network
adapter.
1. Disable the write filter.
2. Reboot the machine.
3. Navigate to c:\snfs\config .
4. Edit the FsNameServers file to add a line containing the IP address of the Control network for
each host name server. Do not include any loopback IP addresses in this file.
5. On the Windows desktop right-click My Network Places and select Properties .
The Network Connections window opens.
6. On the menu bar at the top of the window, select Advanced , then Advanced Settings …
7. On the Adapters and Bindings tab, order adapters as follows:
a) Control network
b) Media network
c) Loopback adapter
8. To close Advanced Settings and accept the changes, click OK .
9. Close the Network Properties window.
10. If you are using a standalone K2 Summit system with Dyno PA, proceed to Configuring the DLC
Server. If you are using a K2 Summit SAN system with Dyno PA, proceed to About the K2 Dyno
PA application and the Dyno Production Assistant platform service.
Related Links
Configuring the standalone K2 Summit system and K2 Dyno PA on page 9
About K2 Summit standalone system and K2 Dyno PA DLC configuration on page 10
Configuring the DLC server on a K2 Summit standalone
Prerequisites:
• The K2 software must be installed and configured as specified in the K2 Summit documentation.
• The file system name and storage disk labels on the K2 Summit system need to be unique. For
more information, see About unique file systems and K2 Dyno PA.
• The network adapters need to be ordered as described in Ordering the network adapters for K2
Dyno PA.
22 June 2011 K2 Dyno Production Assistant Configuration Manual version 2.0 13
Configuring the standalone K2 Summit system and K2 Dyno PA