Grass Valley K2 Dyno PA Configuration Manual v.2.0 - Manual (Page 14)

To enable the Browse feature on the K2 Dyno PA application, the DLC server needs to be configured
on the standalone K2 Summit system, and the DLC client software needs to be configured on the
Dyno PA machine. This section describes configuring a standalone K2 Summit system.
Tip: Identical FsNameServer files (same file name, same IP addresses in the same order)
must be located on all the Summits and Solos or Dyno PA machines that share the same
Dyno Production Assistant platform service. If configuring multiple K2 Summit systems or
Dyno PA machines, create the FsNameServers file on one machine and then copy it to the
others.
1. From the Start menu, select Programs | Stornext File System | Client Configuration .
The SNFS configuration client opens.
2. Click the Properties button.
The Properties dialog box displays.
3. On the Distributed LAN tab, select Enable Server .
4. Select the Control network as the DLC network.
5. Click OK .
6. Turn write filter on.
14 K2 Dyno Production Assistant Configuration Manual version 2.0 22 June 2011
Configuring the standalone K2 Summit system and K2 Dyno PA