Grass Valley DD35 Family v.3.4.5 - Manual (Page 65)

Supplement Software Release V3.4.5 DD35 Production Switcher
61 Operating Instructions – Rev. 0 / 7.2002
5. SOFTWARE PATCH PANEL
The settings for the “so–called” Soft Patch Panel are located in the menu Install
/ EBox / Input. Select the Input index card.
5.1 INPUT INDEX CARD
Index card for setting the input name transfer parameters and the Software Patch
Panel.
ext. Name: Enable / Disable the name transfer mode with Yes/No
Patched to: Option “Software Patch Panel”:
Software License Key is required!
With the buttons Reset Patch Panel and Patch Panel On/Off
the settings can be activated or resetted.
Router Output: Select the router output channel
Router Level: Select the level of the routing system (e.g. Prosan router)
GPO Preroll: in preparation
Subst. Table: None / SUBSTAB1 ... 15
Selecting a substitution table.
Refer also to Config / Panel / SubstTab menu.
The substitution tables are used for Simulcast mode.
This entry in this index card can only be modified
if in the sidepanel PC‘s registry the value
“USERINTERFACE / INPUT_SUBSTAB_SELECTABLE is set
to “1”.