Grass Valley DD35 Family v.3.4.5 User Manual
Page 60
Supplement Software Release V3.4.5
DD35 Production Switcher
56
Operating Instructions – Rev. 0 / 7.2002
Extended Loop:
In:
start of the loop
Out:
end of the loop
AfterPlay:
time to be played after Out timecode
AutoCue:
not yet supported in the SW–option
Loops:
number of loops, 0 is endless
This mode allows to start outside (before the loop), providing a kind of “leader”.
Once inside the TC range of the loop, the handling is like in “Simple Loop”. When
the loop is finished, it continues playing after the loop for the time indicated in “After-
Play”.
Delay Line:
In:
not used here
Out:
not used here
Offset:
delay offset
AutoCue:
not yet supported
Loops:
not used here
Once set to record, the playout of the channel is delayed by the time indicated by
“Offset”. Since the channel will record endlessly in a circle, the maximum delay is
the record length of the channel (or the cascade).
Live Slomo:
In:
not used here
Out:
not used here
Offset:
replay offset
AutoCue:
not yet supported
Loops:
not used here
Once set to record, the playout of the channel is real time E/E, that means not
delayed. The channel will record endlessly. Any other tape motion command than
record will stop recording, leaving the full record length of a channel (or a cascade)
for e.g. slomo playback. When record stops, the channels goes back in time indi-
cated by “Offset”.