Grass Valley 3430AP CopperHead - Manual (Page 30)

18
Detailed System Description
17 Status Indicators
BASE POWER - indicates the status of all power
levels in the Base Station
• Green when all power levels are normal.
• Red when any power level is not normal.
SYSTEM LOCK - indicates that the Base
Station is communicating with the Camera Unit.
• Green when communicating with Camera Unit
• Red when it is not communicating with the Camera Unit
Note: Hybrid Power Indicators are present only on an AC-powered base station.
FIBER LINK - indicates the optical power status of the Base Station and camera
• Green when both the Base Station and camera optical power are within a normal
range.
• Orange when either the Base Station or camera optical power is not within a normal
range
• Red when both the Base Station and camera optical power are not within a normal
range
ALARM - indicates that some error condition exists in either the Base Station or the cam-
era.
• Red if there is a Base Station error. Refer to the Base Station DIAG for details on the
error.
• Orange if there is a camera error. Refer to CAM DIAG for details for the error.
Rear Panel
Fig. 2-7: Base Station Rear Panel
The rear panel of the Copperhead 3400 base station has four areas of interest:
A) Power & Fiber Connectors
See page 19.
B) Sync/Data/Control Connectors
See page 20.