Grass Valley 3430AP CopperHead User Manual
Page 24
12
Detailed System Description
25 Tally 1 Indicator Light
Indicates the status of the GPI/Tally 1 signal
•
Off when the signal is not present
•
Bright Red when the signal is present
26 Optical Link Indicator
Indicates the status of the optical connection from base to
camera and camera to base
•
Green when both the Base Station and camera control unit
have optical power within normal range.
•
Red when either the Base Station or camera control unit
optical power is not within normal range.
27 Rx Optical Display (Digital Status Display)
Four character display in one of five modes. See
The CopperHead 3430AP Camera Unit Dig-
on page 51 for use of this Digital Status Display
28 Base Rx/Dim Push Button
Change four character display mode. Push and release changes display mode. Push and
hold adjusts LED indicator brightness
29 Power Indicator LED
•
Green indicates power is applied to the camera control unit.
•
Blinking Green indicates a camera control unit error. Refer to DIAG display mode for
details – page 52
30 Power On/Off Switch
Toggle switch controls power to the CopperHead 3430AP Camera Unit, the 12 VDC output
and the camera when using the Sony-V Mount (Camera power control is not available with
the Anton-Bauer mount)