Grass Valley 3-CCD CameraMan Rev.B - Manual (Page 8)

Page 5
Next, take a look at the front of your Tracking System Keypad. It is the control center for your Presenter Camera System and
is composed of the following features.
▼ LOCATION PRESET SELECT - Used
to recall preset locations.
▼ autoTRACK VIEWS - Used to change
the position and perspective of the
presenter in the video frame while
being tracked by the camera (choose
between Tight, Wide, Right and
Left).
▼ ZOOM (IN/OUT) - Used to control
the tightness of the camera view.
Camera Setup Mode:
• Menu (Zoom IN) – Used to
toggle the on-screen menu display
on and off.
• Bars (Zoom OUT) – Used to toggle
the on-screen color bars on and off.
▼ TRACKING FREEZE - Used to disengage
autoTRACK, and freeze the camera’s
movement while in autoTRACK mode.
▼ SETUP – Used in conjunction with other
controls for keypad customization and
camera setup.
Camera Setup Mode:
• Used, when pressed simultaneously with
Mode Button to turn the keypad’s
Camera Setup Mode on and off.
▼ IMAGE CONTROLS - Used to brighten and
darken the video picture.
Camera Setup Mode:
• White Balance Button (Brightness) –
Used to automatically white balance the
camera.
▼ autoIMAGE - Used to allow the camera to
automatically adjust brightness and
darkness for each video picture.
▼ PAN/TILT - Used to Controls the camera’s
up/down, and left/right movement.
Using the PAN/TILT arrow buttons
disengages the autoTRACK mode.
Camera Setup Mode:
• MENU EDIT – Used to navigate through
and adjust the camera settings found in
the on-screen menus.
▼ SUBJECT POSITION CONTROLS - Used
to fine-tune the position of the subject
while in autoTRACK mode.
▼ ON LIGHT - indicates that the Keypad
is operational.
▼ FOCUS - Used to
manually adjust visual
clarity of the video
picture.
▼ MODE - Used, when
pressed simultaneously
with Setup (1) Button to
turn the keypad’s
Camera Setup Mode on
and off.