Grass Valley 3-CCD CameraMan Rev.B - Manual (Page 22)

Page 19
Subject Position Arrows
In the autoTRACK mode, press any one of the four directional Subject Position arrows to
adjust your location in the current autoTRACK View. Pressing the up, down, right or left
arrows changes the subject's position in the video frame.
If the subject appears too
low in the frame...
...press the UP arrow to raise
the subject’s position.
...press the LEFT arrow to
move the subject’s position. If the subject appears too far
to the right in the frame...
Manual Pan/Tilt Arrows
Press the up, down, right, or left PAN/TILT arrows to pan or tilt the autoTRACK camera in
that direction.
By pressing any of the PAN/TILT arrows in the Camera Control section of the
Tracking System Keypad, you will disengage the autoTRACK mode.
To reactivate the autoTRACK mode, press any of the four autoTRACK View
buttons. This will engage the autoFIND mode. When the presenter is in the field-of-
view, CameraMan locks onto line-of-sight tracking in the view selected.
Subject
Position
arrows
Manual
Pan/Tilt
arrows
This section is dependent upon the orientation of your panning arrows. We have used the default orientation for the examples.