Grass Valley 3-CCD CameraMan Rev.B - Manual (Page 20)

Page 17
TIGHT autoTRACK View
Press the TIGHT autoTRACK View button. The video frame should show a close
head shot of you. This view is used to emphasize facial expressions. If you would
like to alter your image in this view, you will need to reset the Tight View.
To SET or CHANGE the tight autoTRACK View:
1. After pressing TIGHT View, use the SUBJECT POSITION arrows to position yourself in the
middle of the video frame.
2. Use the manual ZOOM buttons to set the needed Zoom perspective, if needed.
3. Use the manual FOCUS buttons to set the focal point, if needed.
4. Use the manual IMAGE buttons to set the needed light/dark contrast, if needed.
5. Press and hold TIGHT until you hear two beeps indicating the new setting is stored.
To RECALL the tight autoTRACK VIEW:
• Press and release TIGHT View. The camera recalls the information stored with the TIGHT
button.
WIDE autoTRACK View
Press the WIDE autoTRACK View button. The video frame should show a wide
body shot of you. If you would like to alter your image in this view, you will need
to reset the Wide View.
To SET or CHANGE the wide autoTRACK VIEW :
1. After pressing WIDE View, use the SUBJECT POSITION arrows to position yourself in the
middle of the video frame.
2. Use the manual ZOOM buttons to set the needed Zoom perspective, if needed.
3. Use the manual FOCUS buttons to set the focal point, if needed.
4. Use the manual IMAGE buttons to set the needed light/dark contrast, if needed.
5. Press and hold WIDE until you hear two beeps, indicating the new setting is stored.
To RECALL the wide autoTRACK VIEW:
• Press and release WIDE View. The camera recalls the information stored in the WIDE
button.
Step 1
Step 2
Steps
3 and 4
Step 5
Step 1
Step 2
Steps
3 and 4
Step 5