Grass Valley Aurora Browse v.7.0 - Manual (Page 31)

Description Number
Creates a Mark In point at the current frame. The timecode of the Mark In point
is displayed. 1
Shows the location in the asset being played. Drag the slider to scrub through
the asset. 2
If the proxy material is still under construction, this LED lights orange. 3
Toggles the timecode control track. The control track counts frames relative to
the control point. 4
Sets the control point for the timecode control track. By default, this point is at
the start of the asset, but it can be set at any position. When displaying the
timecode control track, the value displayed will be relative to this point. 5
Drop-down list of storyboard options; lets you filter, recreate, or reload
storyboards 6
Locks/unlocks the storyboard scrolling 7
A storyboard element. When you select a storyboard element, the frame is
outlined in blue and an eye icon displays in the upper left-hand corner. 8
Moves the asset back one frame 9
Jogs the asset back ten frames 10
Rewinds the asset 11
Plays the asset from the start 12
Plays the asset from the location of the slider. 13
Shows the timecode of the current location in the asset 14
Stops the playing of the asset 15
Fast forward 16
Jogs the asset forward ten frames 17
Moves the asset forward one frame 18
Reloads the current asset 19
Toggles loop playback 20
Zoom knob. Zooms the seekbar so that it focuses on a smaller part of the timeline. 21
Creates a Mark Out point at the current frame. The timecode of the Mark Out
point is displayed to the right. 22
Related Links
Using the storyboard on page 34
Copying an asset on page 38
Managing proxies on page 33
Playing an asset on page 32
10 March 2010 Aurora Browse User Guide 31
Edit