Grass Valley 8990ARC v.1.0 - Manual (Page 20)

14 8990ARC Instruction Manual
8990ARC SD Aspect Ratio Converter
The 8990ARC will indicate a SMPTE Alarm fault on the Frame Status
display for the following alarms:
■ Lack of valid video input
■ Internal Fault
■ Board Failure
Module Configuration Displays
The 8900 GUI provides the following links and displays for the 8990ARC
module (
Figure 10 ):
■ Status and Slot Configuration displays showing status and slot config-
uration information (location and user assigned names),
■ Module Configuration displays, and
■ Software Update display.
The Status and Slot Configuration displays operate in the same manner for
all remote controllable 8900 modules. Refer to the 8900NET manual for
more information on these displays. Some functions listed may not be sup-
ported by a particular module. These will be indicated as not supported.
Figure 10. 8990ARC Display Links
Software Update Display
The Software Update display allows you to download new software ver-
sions for the module. Refer to the 8900NET manual and the Grass Valley
Group web site at http://www.grassvalleygroup.com for complete details
and new software versions.
Module Configuration Displays
This section discusses the Module Configuration Displays used to set
parameters required for 8990ARC module operation. You may select
output format, control options, and signal options. Press the
APPLY button to
activate the selections.
Status and Slot Configuration Displays
Software Update Display
Module Configuration Displays