Grass Valley 8990ARC v.1.0 - Manual (Page 11)

8990ARC Instruction Manual 5
Power Up
Power Up
The various front LED indicators and configuration switches are illustrated
in
Figure 4 . Upon power-up, the green PWR LED should light and the
yellow CONF LED should illuminate for the duration of module initializa-
tion.
Operation Indicator LEDs
With factory default configuration and a valid input signal connected, the
green PWR LED, and one of the green signal standard LEDs (525 or 625)
should illuminate (refer to
Table 2 on page 6 to see the possible operating
indicator combinations).
Video input presence is indicated by the appropriate 525 or 625 LED (indi-
cating a 525-line or 625-line input signal has been detected). The appro-
priate Mode LED is on.
Figure 4. LEDs and Configuration Switches
A red FAULT LED indicates an error situation and, with the previously
described LEDs, can indicate the operational conditions presented in
Table 2 on page 6 .
8036_05
Mode 1 (yellow)
Mode 2 (yellow)
Mode 3 (yellow)
Mode 4 (yellow)
Fault (red)
Comm (yellow)
Conf (yellow)
Power (green)
525 (green)
625 (green)
16:9 (yellow)
4:3 (yellow)
16-position
Rotary switch
Momentary paddle switch
GND