Grass Valley 8981NR - Manual (Page 29)

8981NR Instruction Manual 29
Configuration
Recall or Save Settings Page
Four storage registers are accessible on the module for saving and recalling
module settings. Enter a register number or use the arrow buttons to bring
up a specific register.
• Set up the desired module parameters and enter a register number (1-4)
in the
Save Register # field to store the setup and select the Apply button.
Select the Store User Settings button to save the current module configu-
ration.
• Recall the register by entering the number (1-4) in the Recall Register #
field and selecting the Apply button then the Restore User Settings button.
• Recall Fact Defaults – select this button to recall the factory defaults listed
in Table 3 on page 16 .
Figure 12. 8981NR Timing with Line Sync
Use
this
link