Grass Valley 8981NR - Manual (Page 20)

20 8981NR Instruction Manual
Configuration
Remote Configuration and Monitoring
8981NR configuration and monitoring can be performed using a web
browser GUI interface when the 8900NET Network Interface module is
present in the frame (Gecko 8900TFN frame). This section describes the
GUI access to the module configuration functions.
For remote access, make sure the jumper block on the module is set for both
Local and Remote access (
Figure 5 on page 17 ).
Refer to the 8900NET Network Interface Module Instruction Manual for infor-
mation on the 8900NET Network Interface module and setting up and
operating the Gecko 8900 frame network.
Refer to the Frame Status page shown in Figure 6 on page 21 . The 8900
modules can be addressed by clicking either on a specific module icon in
the frame status display or on a module name or slot number in the link list
on the left.
Note The physical appearance of the menu displays on the web pages shown in
this manual represent the use of a particular platform, browser and version
of 8900NET module software. They are provided for reference only. Displays
will differ depending on the type of platform and browser you are using and
the version of the 8900NET software installed in your system.
Use the Refresh button to update the display (available with 8900NET soft-
ware version 3.0 and later).
The Online Manual Link button can be set up to link to the documentation in
pdf format. Link configuration is done on the Frame Configuration page.
For information on status and fault monitoring and reporting shown on the
Status page, refer to
Status Monitoring on page 36 .