Grass Valley 8981NR - Manual (Page 26)

26 8981NR Instruction Manual
Configuration
Proc Amp Page
The Proc Amp page ( Figure 10 on page 27 ) provides access to processing
amplifier controls. Refer to Table 3 on page 16 for a summary of controls,
defaults, parameter ranges and what lines of video are affected by each
control.
• Proc Amp– enable or disable (On/Off) processing amplifier for the SDI
signal.
When the Proc Amp is enabled, the following controls will be active:
• Y Gain – adjusts the percentage of luminance relative to white.
• B-Y Gain – adjusts the percentage of B-Y gain.
• R-Y Gain – adjusts the percentage of R-Y gain.
Set the Gain Lock control to On to adjust the gain of all three channels together
with any of the gain controls above.
• Y Offset – adjusts percentage of Y offset.
• B-Y Offset – adjusts percentage of B-Y offset.
• R-Y Offset – adjusts percentage of R-Y offset.
Use
this
link