Grass Valley 8943FC User Manual
Page 29
8943FC — Instruction Manual
29
Installation
To utilize a 16 channel configuration using the 8939FCA and 8939FCB,
follow the setup below.
Install the CWDM fiber optic SFP devices on the 8939FCA as described in
CWDM 16 Channel Configuration on page 28
. You will be using the EXP
ports to connect to the 8939FCB instead of a 1310nm GeckoFlex fiber-ready
module.
The 8943CF modules feeding the 8939FCA should have the following fiber
optic SFP devices installed for channels 1-8:
•
SFP-CWDM3G-1-K Dual Transmitter (1490nm/1470nm frequencies)
•
SFP-CWDM3G-2-K Dual Transmitter (1510nm/1530nm frequencies)
•
SFP-CWDM3G-3-K Dual Transmitter (1550nm/1570nm frequencies)
•
SFP-CWDM3G-4-K Dual Transmitter (1590nm/1610nm frequencies)
The 8943FC modules receiving the fiber signals from the 8939FCA should
have SFP-13103G-M1DRX-K Dual Receivers installed in each of the four
locations. Refer to the detailed diagram in
.
The eight additional channels are provided by two 8943CF modules
feeding the 8939FCB with the following CWDM transmitter SFP devices:
•
SFP-CWDM3G-5-K Dual Transmitter (1310nm/1330nm frequencies)
•
SFP-CWDM3G-6-K Dual Transmitter (1350nm/1370nm frequencies)
•
SFP-CWDM3G-7-K Dual Transmitter (1390nm/1410nm frequencies)
•
SFP-CWDM3G-8-K Dual Transmitter (1430nm/1450nm frequencies)