Grass Valley 8943FC - Manual (Page 10)

10 8943FC — Instruction Manual
Introduction
The 8943FC can be populated with the dual receiver SFP devices listed in
Table 1 . SFP devices come in kits containing the SFP device, a mounting
bracket, and a fiber cable assembly. Kit part numbers are indicated by a -K
at the end of the part number. Refer to
Figure 3 on page 14 for a kit example.
The SFP devices are capable of handling bit rates from 143 Mb/s up to
3 Gb/s. Refer to
Table 1 for the current SFP devices for use with the 8943FC
module.
Note This manual shows 8943CF and 8943FC CWDM functionality in conjunction
with the 8939FCA and 8939FCB fiber optic Mux/Demux modules. There are
other applications for CWDM application not covered here.
These receivers will accept all CWDM frequencies from the SFP transmitter
modules on the 8943FC. Refer to
Table 1 for SFP models available.
Table 1. Fiber Optic SFP Device Dual Receiver Options
SFP Device Type Frequencies
SFP-13103G-M1DRX-K (Full Kit)
Dual Receiver 1270nm 1610nm SFP-13103G-M1TRX 1
1 Spare SFP devices can be purchased without a kit, but initial installation requires the full kit.
SFP-13103G-M2TRX
1