Installation, Gecko 8900 frame, Frame capacity – Grass Valley 8910ADA-M User Manual
Page 10
10
8910ADA-M/ST/SR — Instruction Manual
Installation
Installation
The 8910ADA can be installed in either an 8900 Gecko or GeckoFlex frame.
An 8900A-R rear module is required for use in the GeckoFlex frame.
Gecko 8900 Frame
Installation of the 8910ADA module in an 8900 Gecko frame is a process of:
1.
Setting local onboard jumper settings if using Local controls,
2.
Placing the module in the proper frame slot, and
3.
Cabling signal ports.
The 8910ADA module can be plugged in and removed from an 8900 Series
Audio frame with power on. When power is applied to the module, LED
indicators reflect the initialization process (see
).
Frame Capacity
The maximum number of 8910ADA-M/ST modules can be installed in all
8900 Series Audio frames since the maximum power consumption and heat
generation is below frame cooling capacity. A maximum of six
8910ADA-SR modules can be used in a 30 Watt frame.
provides the
power capacity, cooling capacity, and maximum module count for each
frame type.
Note
Module capacity figures assume no other modules are in the frame.
Table 1. Power, Cooling, and Module Capacity of 8900 Audio Frames
Capacity Calculated
8900TX-A
Frame
(no fan)
8900TF-A
Frame
8900TFN-A
Frame
Power (W)
100
100
100
Recommended Module Cooling (W)
30
90
90
8910ADA-M Modules
10
10
10
8910ADA-ST Modules
10
10
10
8910ADA-SR Modules
6
10
10