H3C Technologies H3C S5500 Series Switches - Manual (Page 18)

10
NOTE:
The S5500-52C-PWR-EI is shipped with the two expansion interface card slots covered by filler panels.
You can select one or two interface cards for your switch as needed. For the interface cards available for
the S5500-EI Switch Series, see "
Interface cards ." For how to install an interface card, see " Installing and
removing an interface card ."
Ports
Console port
Each S5500-EI switch provides one console port on the front panel.
Table 3 Console port specifications
Item Specification
Connector type RJ-45
Compliant standard Asynchronous EIA/TIA-232
Transmission baud rate 9600 bps (default) to 115200 bps
Service
• Provides connection to an ASCII terminal.
• Provides connection to the serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
10/100/1000Base-T Ethernet port
Table 4 10/100/1000Base-T Ethernet port specifications
Item Specification
Connector type RJ-45
Interface standard
• 10 Mbps, half/full duplex
• 100 Mbps, half/full duplex
• 1000 Mbps, full duplex
• MDI/MDI-X, auto-sensing
Max transmission distance 100 m (328.08 ft)
Transmission medium Category-5 (or above) twisted pair cable
Standards IEEE 802.3i, 802.3u, 802.3ab
SFP port
The S5500-EI Switch Series provides 1000Base-X SFP ports, and you can install the 1000 Mbps and 100
Mbps SFP transceiver modules, as shown in Table 18 and Table 19 , in the ports.