H3C Technologies H3C S7500E Series Switches - Manual (Page 7)

6
# Specify the file newest.app as the main system software image to be used at the next startup of
the active MPU.
boot-loader file flash:/newest.app slot 0 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
0!
# Specify the file newest.app as the main system software image to be used at the next startup of
the standby MPU.
boot-loader file slot1#flash:/newest.app slot 1 main
This command will set the boot file of the specified board. Continue? [Y/N]:y
The specified file will be used as the main boot file at the next reboot on slot
1!
# Reboot the switch to validate the upgrade.
reboot
Start to check configuration with next startup configuration file, please wait.
........DONE!
This command will reboot the device. Continue? [Y/N]:y
CAUTION:
•
To prevent configuration loss, save the latest configuration changes before you reboot the switch.
• System software images must be saved in the root directory of the storage medium. You can copy or
move system software images to the root directory. For more information about the boot-loader
command, see Fundamentals Command Reference in the H3C S7500E Series Ethernet Switches
Command References.
3. Install patches
# Download the patch package file to the root directory of the storage medium of the active MPU
and that of the standby MPU, and then install the patch package file with the patch install
command.
system-view
[Sysname] patch install flash:
Patches will be installed. Continue? [Y/N]:y
Do you want to continue running patches after reboot? [Y/N]:y
Installing patches........
Installation completed, and patches will continue to run after reboot.
NOTE:
•
A patch file must have a valid name. Otherwise, the system cannot identify and install it. Table 1 shows
the default names of patch files.
• For more information about patch installation, see Fundamentals Configuration Guide in H3C S7500E
Series Ethernet Switches Configuration Guides.
Table 1 Patch files for different types of cards
Card type Default patch file name
MPU patch_mpu.bin
LPU patch_lpu.bin